HOME ABOUT US CONTACT US NEW MACHINERY USED MACHINERY FINANCING HOFMANN SEMINARS & PRESENTATIONS **LIQUIDATION SALE**
USED MACHINERY
Browse by Application:


SOLD
View All 6 Photos      View Slideshow






1509-09

Giben Prismatic 201 Rear Load Saw Used

Model: Prismatic2 201; SN: 674.01.xxx; Year: 2001.
460v; 3ph; 60.

Maximum cutting length 4500 mm (14.8   ft)
Working table  height 950  mm (37.4 inches)
Maximum saw blade  projection 115 mm (4.5   inches)
Maximum grippers  opening 117 mm (4.6  inches)
Main saw motor 18 Kw (25 HP)
Angular velocity 3185  RPM-
Blade  diameter hub diameter 430 mm
Scoring saw 75mm @ 2.65Kw (3.5   HP) 5035 RPM; Diameter 215 mm; Arbor 50mm.

LIFT  TABLE  IN-FEED

Size  of the lift table 4500 x 1600 mm (14.8   x 5.2   ft)
Lift motor Kw (4.8 HP)
Lift table infeed height from floor 320 mm (12.6   in) minimum
Lifting I lowering  speed  0.7 m/min (2.3   ft/min)
Minimum bunk capacity:  700 mm (27.5   in.)
Maximum bunk capacity:  800 mm (31.5  in)
(Machine  will require  pillars  or pit  in lift table area) 
Please note that  work table height will vary depending upon final bunk height required  by customer.

PUSHER
 
Controlled  by ac brushless
Continuous  torque  output 6.5Nm
Feed speed from 1 to 60 m/rnin (3  to  197  ft/min)
Return  speed 60 m/min (197   ft/min)
Overall stroke 4690 mm (11 ft)
Length  of support table under pusher 3090  mm (10.1   ft)
Automatic  loading  minimum thickness 8 to  10  mm (.31    to .39  in.)
Support  roller modules  in pusher area Fourteen  (14)

FRONT  SUPPORT  TABLES

The area of the worktable  where the operator   stands   is equipped  with  air flotation  tables  to ease the handling of the material  being sized.
 
Air flotation  tables 5 tables 2000 x 510 mm (78.7 x 20 in.)

Lift Table.  The Giben lift table lifting mechanism relies on four (4) heavy duty screwjacks at the four cornerpoints  of the lift table itself   The four (4) screwjacks are simultaneously  operated by one common chain driving system.   This mechanism ensures that the lift table rises and lowers perfectly horizontal,  even when loaded with heavy out-of- center panel  bunks.

Lift Table.  The Giben lift table lifting mechanism relies on four (4) heavy duty screwjacks at the four cornerpoints  of the lift table itself. 


The Pusher Beam is driven by servo motor  and a high precision  rack  and  pinion  mechanism. The design is completed  by a positioning system controlled by an encoder that directly reads from the same rack of the pusher beam.



Saw Carriage: travel speed from 3 - 427 FPM (1 - 130 MPM), 427 FPM (130 MPM) constant return, powered by inverter drive & AC brushless motor. 
Pusher fence: (5) floating material clamps (open up to 4.5" (115 mm); pusher speed 3 - 115 FPM (1 - 35 MPM), constant return 197 FPM (60 MPM); pusher powered by AC Servo motor on rack & pinion system. 
Rear Table: Roller module rear machine table with in-line roller track rails; double split pressure beam enables continuous material control during final trim cut, front & back pneumatic side alignment w/automatic pre-positioning by "G-Drive2" microprocessor,

$52,500.00


Replacement cost: $180,000.00, (approx.).
FOB: Hudson, NY
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.