HOME ABOUT US CONTACT US NEW MACHINERY USED MACHINERY FINANCING HOFMANN SEMINARS & PRESENTATIONS **LIQUIDATION SALE**
USED MACHINERY
Browse by Application:


SOLD
View All 13 Photos      View Slideshow










1708-05

ANDI Startos/SUP CNC Router (Used)

Model: Stratos/SUP; SN: xxxxx; Year: 2002.
208/240v; 3ph; 60.

VIDEO

ANDI STRATOS SUP 5X10 WITH ATC AND BORING

5 X 10" Moving gantry, stationary table design in a front to back configuration with a 2-zone phenolic vacuum plenum, and pop-up pins for easy material location. 
Equipped with: 
(1) 10 HP ISO-30 Type ATC spindle, vaiable speed frrom 1,000-18,000 RPM, 8-station tool carousel, (1) 9-spindle vertical drill block
All axes: 
Utilize FANUC AC Servo motors and Servo amplifiers driving precision ball screws , and ride on profile way bearing systems for rapid feed rates up to 1,968 IPM on the X- and Y-Axis, and 472 IPM on the Z-Axis: ball screw and way bearings are serviced by an automatic lubrication system. 
Control: 
ANDI FANUC "0i" CNC PC front system with PC and PLC control; color monitor, large hard disk for program storage; RS-232 interface; linear, circular and hilical interpolation, automatic acceleration and decleration, fast corner function, hand held teach pendant, absolute an incremental programming, feed rate and spindle speed manual override. 
Complete with: 
(1) 10 HP BECKER vacuum pump, assorted tooling, and original documentation. 
Dimensions: 216-L x 112"W x 108"H
Weight: 18,000 lbs 

5 X 10" Moving gantry, stationary table design in a front to back configuration with a 2-zone phenolic vacuum plenum, and pop-up pins for easy material location. 

Equipped with: 

(1) 10 HP ISO-30 Type ATC spindle, vaiable speed frrom 1,000-18,000 RPM, 8-station tool carousel, (1) 9-spindle vertical drill block

All axes: 

Utilize FANUC AC Servo motors and Servo amplifiers driving precision ball screws , and ride on profile way bearing systems for rapid feed rates up to 1,968 IPM on the X- and Y-Axis, and 472 IPM on the Z-Axis: ball screw and way bearings are serviced by an automatic lubrication system. 

Control: 

ANDI FANUC Series 21i-M CNC PC front system with PC and PLC control; color monitor, large hard disk for program storage; RS-232 interface; linear, circular and hilic-interpolation, automatic acceleration and decleration, fast corner function, hand held teach pendant, absolute an incremental programming, feed rate and spindle speed manual override. 

Complete with: 

(2) 10 HP BECKER vacuum pumps, assorted tooling, and original documentation. 







$39,000.00


Replacement cost: $125,000.00, (approx.).
FOB: Hudson, NY
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.