Boring Machine, Double Line Pneumatic,
Number of drilling spindles 2x 23
Center distance between spindles 32mm
Min-Max distance between two drill heads 5"-27"
Maximum depth of drill 3"
Collet Bore Diameter 10mm
Spindle Rotation 3400 rpm
Motor power 2x 2 hp - 3 phase
Supply Voltage 220/60 hz
Air pressure required 0.6 mpa
Fence Length 120"
Number of stops 4
Number of index pins 2
Machine dimensions (L, W, H) 43" x 43" x 61"
Machine Weight 1300 lbs
Vertical Depth Control System brings control of the bore depth to the front of the machine. A stacked set of knobs and depth indicators enable the operator to adjust both heads separately without subjecting the operator to the hazards of accessing the vertical drive cylinder under the machine, as required by other manufacturers.
The indicator provides a straight line,1 to 1 reference to the bore depth.
Articulating Control Panel allows the operator to relocate the controls
to the optimum position for each job. No mater what position you are feeding the machine from the controls are directly accessible.