HOME ABOUT US CONTACT US NEW MACHINERY USED MACHINERY FINANCING HOFMANN SEMINARS & PRESENTATIONS **LIQUIDATION SALE**
USED MACHINERY
Browse by Application:


SOLD
View All 11 Photos      View Slideshow









1506-06

Weeke 4-Axis Machining Center (Used)

Model: Venture 3M; SN: 0-250-17-xxxx; Year: 2009.
480v; 3ph; 60.

Working Capacity:

  • "X" Axis is 3,250 mm (127.9"), "Y" axis is 1,250 mm (49.2") for boring & 1,325 mm (52.2") for routing, "Z" axis max. material thickness 125 mm (4.9").

    Positioning Speed:
  • "X" Axis travel speed of 100 MPM (328 FPM), "Y" axis travel speed of 50 MPM (164 FPM), "Z" axis travel speed of 20 MPM (66 FPM); head travels on THK linear motion guides on all axes.

    Worktable:
  • (6) Movable K-Table support rails w/side mounted raise-and-lower panel feeding rails, (3) vacuum pods per rail; setup assistance through the PC control display for precise rail & vacuum pod positioning; (6) pneumatic backstops, (2) pneumatic side stops create (2) working zones.

    Boring Unit:
  • 3 HP (2.2 kW) Motor, variable speed from 1,500 - 7,500 RPM; (19) vertical drill spindles, (11) spindles in "X" axis & (8) in "Y" axis.
  • (6) Horizontal spindles with (2 + 2) in "X" axis & (1 + 1) in "Y" axis; (1) NC controlled 0 - 90 "X" / "Y" grooving saw, 100 mm dia. saw blade.

    Machining:
  • 12 HP (9 kW) Liquid cooled electro-spindle router with HSK F63 adaptor, powered by a frequency inverter w/programmable 1,250 - 24,000 RPM, constant torque from 9,000 - 24,000 RPM, RH or LH rotation.
  • (1) NC Controlled "C" axis for 360 horizontal processing; (1) 14-position ATC tool changer magazine.

    Control:
  • WEEKE IPC PC 85 Power Control + Windows XP + WoodWOP 5.0 operating system for (3) axes with linear, circular & helical interpolation.
  • 17" TFT Monitor, industrial keyboard for data entry, CD R/W & 1.44 MB floppy drives, modem, USB slot, RS-232 serial interface for possible simple PC connection; all mounted in separate free-standing control panel.

    Complete with:
  • 100 cbm/Hr Vacuum Pump, 2-zone safety mats (will stop machine if operator enters work area), safety fences, hand held pendant controller. Actual Model is WEEKE Venture 3 BHC.


$99,500.00


Replacement cost: $195,000.00, (approx.).
FOB: In Plant Brooklyn, NY
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.