HOME ABOUT US CONTACT US NEW MACHINERY USED MACHINERY FINANCING HOFMANN SEMINARS & PRESENTATIONS **LIQUIDATION SALE**
USED MACHINERY
Browse by Application:


SOLD
View All 10 Photos      View Slideshow










1209-01

BRANDT KDF 670 2C W/ PREMILL & CORNER ROUNDING

Model: 660 Profiline 2C Servo; SN: 0-261-02-xxxx; Year: 2006.
220/440v; 3ph; 60hz.

Edge & Workpiece Capacity: 0.4 - 12 mm (0.015 - 0.315") edge; 8 - 55 mm (0.315 - 2.165") panel thickness; 160 mm (6-3/8") min. panel length and 65 mm (2-1/2") min.

Equipped with: Pre-milling Station, for chip-free and clean panel edges ~ Automatic Edgemagazine, for strip & coil stock, 3 mm PVC guillotine ~ "Quick Change" glue tank for maintenance & glue color change ~ Pressure Section, (1) drive plus (3) idle rollers, timed pneumatic pressure controlled & servo positioning for quick edge thickness changeover. ~ Feed Speed, (14) MPM (11 MPM automatically when corner rounding) ~ Motorized top hold-down pressure beam.

Workstations:

End Trimming: (2) Motor 0.37 KW (0.5 HP) 12,000 RPM, automatic chamfer from control panel 0°- 15°.

Flush Trimming: Top/bottom (2) motors, 0.50 KW (0.67 HP) 12,000 RPM with 2-position vertical movement.

Fine Trimming Station: Top/bottom (2) motors, 0.35 kW (0.50 HP) 12,000 RPM, bevels 0° - 25°, with combination flush/radius/chamfer cutterheads; horizontal and vertical tracing wheels, comes with optional brushless servo-motors for quick thickness changeover.

Corner Rounding Unit: (2) Motor 0.35 KW (0.5 HP) 12,000 RPM for leading and trailing edges of panels; either radius or chamfer cutters can be mounted; 3 mm max. edge thickness.

Radius Scraping (PVC): Top/bottom with pneumatic control, pvc scrape collection box.

Flat Scraper: Top/bottom panel surface scraper with vertical floating action, equippped with insert knives.

Buffing Station: Top/bottom (2) motors, 0.09 KW (0.125 HP) 1,400 RPM.

Complete with: Operator control panel w/PLC (Programmable Logic Control) keypad & LED readouts ~ padded sound enclosure, ~ used tooling ~ all cutting and trimming workstations are "HF" (High Frequency Motors) ~ line control "NO" limit switches for workstation functions.


$65,000.00


Replacement cost: $135,000.00, (approx.).
FOB: Hudson, NY
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.