HOME ABOUT US CONTACT US NEW MACHINERY USED MACHINERY FINANCING HOFMANN SEMINARS & PRESENTATIONS **LIQUIDATION SALE**
USED MACHINERY
Browse by Application:


SOLD
View All 16 Photos      View Slideshow










1703-01

Brandt Ambition 1220FC Premill & Corner-Rounding (Used)

Model: Ambition 1220FC HiFlex; SN: 0-261-02-xxxx; Year: 2011.
208-480v; 3ph; 60.

Brandt Bander in Exceptional Condition

VIDEO

Edge band thickness 0.4 – 8mm (0.016" - 1/4” )

Coil cutoff maximum 0.8 x 60 mm; 3.0 x 45 mm (PVC)

Edgeband height 12 - 65 mm (1/2" – 2 9/16 ")

Panel length min. 160 mm (6 3/8")

Panel width min. 65 mm (2 3/8")

Panel thickness - min. 8 mm (5/16") - max. 60 mm (2 3/8")

Feed speed –  11m or 36ft/min.

- Internal modem for remote diagnostic link.

Smooth upper pressure rollers.

Automatic feed track lubrication system.

Pre-Mill/Joint Trimming

First pressure roller driven and three idle pressure rollers.

Double motor end trimming unit.

Program controlled indexing from straight to bevel end trimming.

Fine Trimming Station: Top/bottom (2) motors, 0.35 kW (0.50 HP) 12,000 RPM, bevels 0° - 25°, with combination flush/radius/chamfer cutterheads; horizontal and vertical tracing wheels. 

Corner Rounding Unit: (1) Motor 0.35 KW (0.5 HP) 12,000 RPM for leading and trailing edges of panels; either radius or chamfer cutters can be mounted; 3 mm max. edge thickness.

Radius Scraping (PVC): Top/bottom with pneumatic control, pvc scrape collection box.

Finish Scraping Unit.

Isolation transformer with variable infeed voltage for balancing all three phases of incoming power.  This transformer will increase the lifetime of the machine’s electrical components and help prevent unexpected and unnecessary machine breakdowns.  Also helps dampen power surges and cancels line noise.


$42,500.00


Replacement cost: $79,000.00, (approx.).
FOB: Hudson, NY
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.