Edgeband thickness cap.: 0.4 - 20 mm (3/4");
(at max. thickness, banding height is reduced to 1-3/4");
Panel thickness from 5/16" to 2-5/32" with PVC or HPL banding;
Min. panel width 2-3/4" and 5" min. length.
Equipped with: Quick Melt glue system with granular hopper feed & pre-melting chamber,reversible glue roller.
Edgebanding magazine for application of solid edges from 0.4 - 20 mm thickness and coil material from 0.4 - 3 mm thickness;
reinforced guillotine for coiled edgebanding material 0.4 - 3.5 mm thickness and 8 - 55 mm height.
Pressure section with large driven and pneumatically controlled idle rollers, and with SKIO digital counter setting.
Workstations: Double motor end trim (1 HP - 14,400 RPM motors),
pneumatic control for straight or chamfer trimming; top & bottom flush trim (2 HP - 14,400 RPM motors).
Top & bottom fine/bevel & radius trim (0.75 HP - 14,400 RPM motors), tilts 0° - 25°, with vertical & horizontal tracing.
Top & bottom PVC scraping unit top & bottom buffers (0.33 HP - 1,680 RPM motors). All trimming units are equipped with electronic motor brakes and SIKO digital readouts for quick setup & adjustment; 80 mm wide Heavy Duty feed chain w/rubber pads, automatic chain track lubrication.
Feed motor 3 HP for feed speed of 23 - 82 FPM; (4) 80 mm dia. and (1) 100 mm dia. dust extraction outlet.