This is an Edgebanding Hot Press/Clamp.
It can band an 8' Panel in one pressing or longer lengths if you shuttle
• Panel, T-edge, PVC & wood strip are positioned into press chamber (8' x 2" opening for board size), max.
edge strip from tape to 2" x 2-2/8" high.
• Through a 2-stage process, the foot switches activate the pneumatic & clamping system which continuously
applies bottom & side pressure evenly distributed over entire workpiece allowing tight glue joints (panel
clamping with pressure of up to 110 PSI, edge strip clamping pressure 55 PSI). Panel heating unit - 1 kW
(220 V, 1-Ph).
• Equipped With: (4) Movable clamp/pressure cylinders (working pressure 3-10 Bar) with each of the press
surfaces equipped with a 60mm (2-3/8") wide heated surface (adjustable between 50-240° Celcius). A
moveable edge clamp gauge system positions the edge strip for drop edges or overhangs uniformly.
• Glue curing times will vary pending glue consistency as well as material thicknesses. - Unit is mounted on
casters and top mounted operator controls have pressure & temperature gauges.