HOME ABOUT US CONTACT US NEW MACHINERY USED MACHINERY FINANCING HOFMANN SEMINARS & PRESENTATIONS **LIQUIDATION SALE**
USED MACHINERY
Browse by Application:


SOLD
View All 9 Photos      View Slideshow









1605-01

Opti-Sand L222 Moulding Sander (Used)

Model: L222; SN: ;
230/460v; 3ph; 60.


The Opti-Sand Moulding Sander is designed to thoroughly and uniformly finish sand and sealer sand work pieces such as mouldings, trim, flooring, etc. 
The Opti-Sand Moulding Sander has two or more horizontal top spindles and can have two or more vertical side spindles and/or two or more horizontal bottom spindles to sand the various surfaces of the work pieces. All spindles are adjustable for different part sizes as well as abrasive wear. The top and side spindles are tiltable for optimum sanding. Full width pressure rollers easily adjust by hand crank to hold the work pieces firmly on the power conveyor and against the rear guide fence. 
Specifications
Work Piece Width(max): 12"
Work Piece Height(max): 4"
Work Piece Length(min): 30"
Horizontal Spindles: 4
Horizontal Spindle Size: 12"L x 12"D
Horizontal Spindle Motors(each): 1HP
Vertical Spindles: 2
Vertical Spindle Size: 6"L x 8"D
Vertical Spindle Motors(each): 0.5HP
Spindle Speed(variable): 100-1200 RPM
Conveyor Speed(variable): 10-100FPM
The Opti-Sand Moulding Sander is designed to thoroughly and uniformly finish sand and sealer sand work pieces such as mouldings, trim, flooring, etc. 
The Opti-Sand Moulding Sander has two horizontal top spindles and two vertical side spindles and two horizontal bottom spindles to sand the various surfaces of the work pieces. All spindles are adjustable for different part sizes as well as abrasive wear. The top and side spindles are tiltable for optimum sanding. Full width pressure rollers easily adjust by hand crank to hold the work pieces firmly on the power conveyor and against the rear guide fence. 

Specifications
Work Piece Width(max): 12"
Work Piece Height(max): 4"
Work Piece Length(min): 30"
Horizontal Spindles: 4
Horizontal Spindle Size: 12"L x 12"D
Horizontal Spindle Motors(each): 1HP
Vertical Spindles: 2
Vertical Spindle Size: 6"L x 8"D
Vertical Spindle Motors(each): 0.5HP
Spindle Speed(variable): 100-1200 RPM
Conveyor Speed(variable): 10-100FPM



$19,500.00


Replacement cost: $30,000.00, (approx.).
FOB: Hudson, NY
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.