HOME ABOUT US CONTACT US NEW MACHINERY USED MACHINERY FINANCING HOFMANN SEMINARS & PRESENTATIONS **LIQUIDATION SALE**
USED MACHINERY
Browse by Application:


SOLD
View All 8 Photos      View Slideshow







1209-10

KENTWOOD 5 HEAD Moulder (Used)

Model: M509; SN: xx2007; Year: 2007.
460v; 3ph; 60hz.

Kentwood M509 5-Head Through Feed Moulder having a working capacity of 9-1/16" in width and 5-29/32" in height with cutting circle diameters from 4-29/64" to 6-19/64" for first bottom, 4-29/64" to 7-7/8" for spindles two through five.

 

Equipped with a:

10 HP motor on the first bottom spindle;
a 7-1/2 motor on the second right hand spindle;
a 7-1/2 HP motor on the third left hand spindle;
a 15 HP motor on the fourth top spindle and
a 10 HP motor on the fifth bottom spindle; with all at 7,200.

All spindles are 1-13/16" in diameter;
LED display delivering feed rates from 19 to 100 FPM s;
top chip-breaker shoes;
"split pad" (pneumatic) pad pressure shoe after top position;
automatic table lubrication pump system;
electronic positioning radial on spindles 3 and 4. 

Hardened chrome tables and fences;
with a cast iron machine base. 

All spindles with mechanical digital counter for radial and axial movement with SIKO displays in inches; top horizontal and left side vertical with "dual digital" counters to display product dimension and tool radius. 

Insulated sound and safety enclosure with safety interlocks and dust collection ports; with two (2) machine located E-stops, one at control panel and one at the end of the machine with a third E-stop with operator's remote pendent.


$31,500.00


Replacement cost: $55,000.00, (approx.).
FOB: Florida
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.