1002-10
UNIQUE DOOR MACHINE (USED)
Model:250; SN:1354060xxx;  Year: 2006.
220/440v; 3ph; 60hz.

Machine to manufacture cabinet raised panel doors with (1) operator in (2) Min.

Equipped with: 10 HP Motor direct drive spindle at 7,800 RPM, 1-1/4" stackable multi-cutter spindle to mill stile, rail, & raised panel profiles; stackable cutter spindle with push button indexing to significantly reduce setup time as each station is preset; the change from one cutter to another is achieved via a select switch for each operation.

Complete with: Table w/pneumatic holddown, 2-way linear movement for straight or cathedral top doors up to 50" long; dust collector hood, and cutter shield and (1) set of cathedral arch templates.


$13,900.00.


Replacement cost: $28,000.00, (approx.).
FOB: NC
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.

USED DOOR EQUIPMENT
USED MACHINERY
Woodworking Application:
Stone Work Application:
1002-11
Unique 265 Cope Cutting Machine (USED)
Model:265; SN:10785060xxx;  Year: 2006.
220/440v; 3ph; 60hz.

Machine to make cope cuts in stile or rail while eliminating tearout.

Equipped with: upgraded 5 HP Motor belt drives spindle @ 7000 RPM , 1-1/4" Spindle with the capability of accepting up to  6" dia. tooling, Max material width 14-1/2", Max. Material thickness 1" 

Complete with: Table w/pneumatic holddown, side clamping to assure square part; dust collector hood, emergency stop and cutter shields.

Capable of cutting up to (6) workpieces, 2-1/2" wide in one pass (14-1/2" max. width).

$5,950.00.

Replacement cost: $9,000.00, (approx.).
FOB: NC.
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.
1002-12
Unique 318 Stile And Rail Machine(USED)
Model:265; SN:0107060xxx;  Year: 2006.
220/440v; 3ph; 60hz.

The UNIQUE "318" Rail Machine is designed to cut precise profiles in rails, ideal for higher volume or production applications. Climb cutting provides better than moulder quality cuts, capable of cutting up to 35 FPM.

Equipped with: 1-1/4" Spindle with 5-1/4" stack height for tooling, max. material width 8", max. material thickness 2", Z-axis spindle movement adjustable with a digital indicator.

Complete with: Hopper feed system; in-feed fence with digital read out, dust collector hood with 4" outlet, emergency stop and cutter shields.

$13,500.00.

Replacement cost: $21,000.00, (approx.).
FOB: NC.
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.
SOLD

SOLD
SOLD