0604-02
USED AUTO “V” GROOVER
Model: VG-8; S/N: MC-92-1025;
440-v; 3-ph; 60-cy 28.1-amps; (110-v control).

This is a Multiple Cross-Groover Miter folding machine w/two feed rates:
15 FPM – 30 FPM .
Five tilting heads 3hp each moving at 3,600 rpm;
120" max. length cap. x 41" max. width cap.
Reciprocating type with (3) grooving heads
and (2) end trim saws mounted on overhead beam.
Spindles are pneumatically locked in position.
- Includes 15 HP feed motor.
Five vacuum support arms;
With four 2-1/2” dia cups per arm (total 20);
Six take off arms;
Scales on both sides of the machine for fast set-up;
One 1hp vacuum unit;
Emergency stop on both sides of machine;
Control box on right-side.
Dimensions: 140” L, 82” D, 58” H.
 
$49,500.00.

Replacement cost: $229,000.00, (approx.).
FOB: Wisconsin
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.



USED V-GROOVERS
0904-06
USED AUTO “V” GROOVER
Model: AVG-48-CC-FT; S/N: 2KXXXXXX; Year: 2006.
440-v; 3-ph; 60hz.

PLC Controlled Combination V- Groover for linear and cross V-Grooving. Heavy Duty frame construction, machine base equipped with anti vibration and anti noise leveling pads.
Specification:
1-Spindle, 10HP - 3600 RPM V Grooving Head, 30mm dia. spindle 3-3/4" clamping length, 10" max. cutterhead dia. 48" max. crosscut cap., unlimited length cap. 18" throat cap. for linear V-Grooving w/ unlimited length cap; material thickness 1/4" - 1-1/8", 3/4" thick aborite plate underneath the cutting area.

2HP Main Hydraulic feed motor, carriage cross travel via driven chain on linear rail and linear bearings, feed rate from 0-50 FPM, linear feeder with motorized height adjustment, variable feed spedd from 0-60 FPM for linear cutting, head up and down movement via pneumatic cylinder and linear rail & linear bearings, depth fine adjustment with special threaded adjustable unit.
PLC Control stores up to (521) programs consisting of work piece width, legnth of cut(if necessary) and up to (24) fence steps for lineal operations. Supports Imperial or Metric units. Carriage settings set via PLC control for cross mode speed, cross return speed, cross jog speed, and lineal mode speed.

$ 55,000.00
Replacement cost: N/A
FOB: CA
This machine is offered “in good running condition as taken from service” and is subject to prior sale.
Specifications are approximate and to the best of our knowledge. Verification is available upon request.



USED MACHINERY
Woodworking Application:
Stone Work Application:
AUTO “V” GROOVER
AUTO “V” GROOVER