Ayen Expert P Boring Machine (USED, 1987)
Ayen Expert P Boring Machine (USED, 1987)
Model: Expert P Boring Machine
SN: N/A
Year: 1987
208/230V; 60Hz; 3~
Stock#: 1804-.4
9-spindle shuttling type drill head bores vertically or horizontal to enable line or construction boring as well as adaptability to custom drilling requirements
Drill head slides side to side on precision linear bearings
(5) positioning stops on the head
9-spindle head provides a 10" drilling length
2 HP motor drives drill head
Maximum width through machine - 33-7/8"
Maximum drilling width - 32-3/4"
Maximum clampinig height - 3-7/8"
(2) extension fences with (2) stops per fence
(3) pneumatic holddown clamps
Replacement cost: $29,000.00, (approx.).
FOB: Hudson, NY
Ayen Expert P Boring Machine (USED, 1987)
Model: Expert P Boring Machine
SN: N/A
Year: 1987
208/230V; 60Hz; 3~
Stock#: 1804-.4
9-spindle shuttling type drill head bores vertically or horizontal to enable line or construction boring as well as adaptability to custom drilling requirements
Drill head slides side to side on precision linear bearings
(5) positioning stops on the head
9-spindle head provides a 10" drilling length
2 HP motor drives drill head
Maximum width through machine - 33-7/8"
Maximum drilling width - 32-3/4"
Maximum clampinig height - 3-7/8"
(2) extension fences with (2) stops per fence
(3) pneumatic holddown clamps
Replacement cost: $29,000.00, (approx.).
FOB: Hudson, NY
Ayen Expert P Boring Machine (USED, 1987)
Model: Expert P Boring Machine
SN: N/A
Year: 1987
208/230V; 60Hz; 3~
Stock#: 1804-.4
9-spindle shuttling type drill head bores vertically or horizontal to enable line or construction boring as well as adaptability to custom drilling requirements
Drill head slides side to side on precision linear bearings
(5) positioning stops on the head
9-spindle head provides a 10" drilling length
2 HP motor drives drill head
Maximum width through machine - 33-7/8"
Maximum drilling width - 32-3/4"
Maximum clampinig height - 3-7/8"
(2) extension fences with (2) stops per fence
(3) pneumatic holddown clamps
Replacement cost: $29,000.00, (approx.).
FOB: Hudson, NY
*This machine is offered in good running condition as taken from service and is subject to prior sale. Specifications are approximate and to the best of our knowledge. Verification is available upon request.
